»Home » Products center» Powder Production Equipment
Centrifugal Atomization Powder Production Equipment

Type: Powder Production Equipment

Input Size: blocks, plates, bars, rods, etc. raw materials in various sizes.

Processed Materials: metals or alloys

Applications: Centrifugal Atomization Powder Production Equipment uses rotating-disk centrifuge atomization technology.

send e-mailadmin@efmpt.com

1.The principle of rotating-disk centrifuge atomization technology:  metal liquid flows from smelting furnace to the center of high-speed rotating disk through current-limiting guiding device, and then distributes radially, forming a molten metal thin membrane over rotating disk and this membrane reaching the edge of rotating disk under the effects of inertia and centrifugal force, and consequently the thin membrane is atomized into droplets and furthermore they are solidified into powder. By controlling the parameters of atomizing temperature and rotating speed of rotating disk, atomization can produce high-qualified non-hollow-bore powdered material with uniform particle size, good flow-ability and good arrangement.
2.The equipment is suitable for producing metal and alloy powders with various melting points, such as solder, aluminum powder, magnesium powder, Sn-Pb powder, Sn-Zn powder, copper powder, stainless-steel powder and other spherical powdered materials.

Rotating-disk centrifugal atomization powdered material production line is consisted of smelting furnace, high rotating-speed centrifugal atomizer, and atomized powder collecting barrel. Each module is precisely controlled by intelligent controlling system.

1.It is applied to the production of metal and alloy powders with various melting points, for battery materials, catalyser and injection molding, 3D printing materials;
2.The superfine powder with good flow-ability and arrangement;
3.It reduces production costs and procedure steps, and produces quality non-hollow powder with uniform particle size;
4.Equipment technology is easily operated and maintained;
5.The rotating speed for atomization is usually 20000~40000rpm, and daily output can reach more than 2 tons;
Currently, this company has developed a powder production line with a melting point up to 1750℃, high-speed electric motor 60000~120000rpm, and particle size 5~350 µm.

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
*
*
*
*
Powder production
Smelting
Sintering
Degreasing
Annealing
Brazing
Quenching Other:
*
50kg/batch
100kg/batch
200kg/batch
250kg/batch
300kg/batch
500kg/batch
1000kg/batch Other:
*